Guns Manufactured by 3D Printers

Question

14:58:00

Asked by

To ask His Majesty’s Government what assessment they have made of the number of guns manufactured by 3D printers circulating in the United Kingdom.

I am pleased to tell my noble friend that no viable fully 3D-printed firearms have been found by law enforcement in the United Kingdom. In 2023, there were 25 instances where police seized 3D-printed component parts or other items associated with 3D printing of firearms.

My Lords, I am grateful to the Minister for that reply. He will have seen the reports this morning that the person who supposedly shot the insurance executive in New York was carrying a 3D-printed weapon. He will be aware that the firearm of choice for young men in Australia and New Zealand is now a 3D-printed weapon. He will be aware that it is possible, by searching for FGC-9 on the internet—I apologise for offending the sensibilities of anyone in the House, but FGC stands for “Fuck Gun Control”—to get detailed manuals of how to make a 3D-printed firearm. What is being done to stop the circulation of such manuals? Is it an offence to download such a manual, as it would be in other circumstances?

I can tell my noble friend that it is an offence to manufacture and distribute a prohibited weapon, such as a handgun or semi-automatic rifle, however it is manufactured. That carries a sentence of life imprisonment. The maximum penalty for possessing such a prohibited weapon, including any 3D-printed prohibited weapon, is 10 years’ imprisonment with a minimum penalty of five years. We will keep legislation under review and there will be opportunities during the course of this Session to review that legislation in relation to any issues that might need to be brought forward.

My Lords, the noble Lord, Lord Harris, raises a serious point. Although, as the Minister said, there have not been too many instances, there have been quite a few where guns have been produced. One big thing that has changed over the past few years is that, apart from producing plastic-based guns, people are now able to produce metallic guns, which means they have more than one use. Of course, we do our best to control that production. We have very strict gun controls in this country. You cannot own a prohibited weapon—a handgun or an automatic weapon—so we are left with rifles and shotguns. If we lose this control point, which 3D printers allow, we will be in a serious situation. Would it be wise to consider banning the software, and the importing of the software, for these 3D printers? Finally, should there be some follow-up investigations on the list of people who have had these 3D printers delivered to find out what they are using them for and whether any of these guns have been produced on those particular printers?

I am grateful to the noble Lord for his helpful intervention. I say quite simply again that 3D-printed firearms are captured by existing firearms legislation. If a 3D-printed firearm is made, it is treated in exactly the same way as any other type of illegal firearm. So they are covered by the legislation, but the suggestions he made are worthy of consideration. We keep those matters under review. Again, there will be opportunities in this Session to look at those issues as a potential police and crime Bill goes through this House.

My Lords, the barrier for acquiring these weapons has been lowered by advancing technology, with criminals, extremists and everyone else being capable of making these guns in a shed or in their own home. Does the Minister accept that it is not good enough to rely on a Private Member’s Bill to tighten the law in this area, and that the Government really need to act as a matter of urgency on this?

I am not aware that the Government are relying on a Private Member’s Bill. There is a Private Member’s Bill coming forward, but it is not a Government-sponsored Bill; it is being undertaken by a Back-Bencher in the House of Commons. We will reflect on that legislation, look at what is needed and make sure that, if there are loopholes, we tie them up. Ultimately, legislation is there to say that firearms are illegal, and there are severe penalties for the ownership and distribution of those illegal firearms. If there are gaps in the legislation along the lines that noble Lords have mentioned, we will review that in due course next year.

My Lords, noble Lords have heard the strong view of the House, from the noble Lords, Lord Harris and Lord Hogan-Howe, among others, that there is a gap in the criminal canon for the downloading of software to make 3D-printed firearms. Clearly, it would be appropriate for the Home Office immediately to launch a consultation on making it an offence to download the software to create 3D-printed firearms. Will the Minister commit to initiating such a consultation immediately?

I will take that as a representation to the Government about their proposals for next year. The Government are exploring all legislative options to criminalise the possession and supply of 3D-printed firearms templates. We are looking at that now; I hope the noble Lord will have patience in this matter.

My Lords, as well as 3D-printed firearms, there has been a significant increase in 3D-printed components used to convert blank firing guns into operable firearms—so much so that the head of the NCA has called for legislation to deal with this issue. Is my noble friend in a position to commit to ensuring that any legislation deals with the illicit manufacture of the components that can turn innocuous blank-firing pistols—which are available for purchase without any licence—into lethal weapons, and not just 3D-printed firearms?

The question of hybrid weapons, again, is covered by existing legislation, in the sense that it is an offence carrying a penalty of life imprisonment to distribute them, and an offence carrying a penalty of between five and 10 years’ imprisonment to hold and own them. If the hybrid nature of firearms is being developed, that again is an issue that we are currently looking at, currently examining. There is a Private Member’s Bill in the House of Commons for consideration in January. The Government will respond to that Private Member’s Bill and will reflect on the points made in both this House and the House of Commons.

My Lords, I had the pleasure of doing a Private Member’s Bill with the late Sir David Amess, which dealt with the supply of machinery that could manufacture, for instance, counterfeit passports. Building on the points made by the noble Lord, Lord Hogan-Howe, when we look at this matter, could we make sure that we look also at any 3D printing of bullets—which is apparently at the cusp of being possible —as well as handguns?

Absolutely. Again, I am in danger of repeating myself to the House. Those matters are under consideration. The Government will review all legislation. Again, the Government’s main aim is to strengthen what we already have: a penalty of life imprisonment for the illegal manufacture and distribution of weapons, and a penalty of five to 10 years for the holding of an illegal weapon. We are keeping these matters under review. I hope the House can hear what I say and understand the consideration that we are making.

My Lords, as a design and technology teacher with four 3D printers in his department, I am fully aware of the advantages and limitations of 3D printing. Does the Minister agree with me that, rather than concentrating on a tiny number of potential weapons, it would be better to look at hunting knives on the streets as a far more dangerous thing?

In proposed legislation in the King’s Speech, the Government are looking at how we can tackle the whole issue of knife crime. Again, there is a range of options for potential action by government there, which will be outlined by the Government in the coming months. I will take what the noble Lord has said as another representation on that, but I hope the House will understand that knife crime is central to the Government’s plans for the reduction of crime and of young, innocent deaths. It is also important that we reflect on matters that have been raised about the potential manifestation of different types of firearm. I have said that it is illegal currently, that we will reflect on legislation in the House of Commons and that there will be opportunities in legislation later this year, in this Session, to examine those matters accordingly. I hope that noble Lords can hear what I have said.

My Lords, my noble friend the Minister will remember that, when we were in the Home Office, I put huge pressure on identifying and stopping the production of bullets, and bullets became the real focus—because without the bullets, of course, the guns are pretty useless. Could I add my concern that, if they start printing bullets, it will become rather different and we will need to look at this in a very different way, because that would be extremely serious?

How could I forget my years in the Home Office with my noble friend? We spent 2009-10 in the Home Office sharing opposite offices; it was a fascinating and enjoyable experience. My noble friend makes some very valid points. Again, I am in danger of repeating myself. The issues that the House is bringing to my attention about the potential manufacture of bullets, guns and hybrid guns are currently, potentially, covered by existing legislation. If they are not, we will review that in the light of Private Members’ Bills, discussions and representations. There are opportunities to continue that discussion further.